Updated on 5/18/2015: See this new post that has been updated for a Debian Jessie host, the latest BeagleBone Black sources and the latest stable eclipse packages.
I'm using Robert Nelson's debian wiki and Linaro and help from a few other sites (links are in the pdf).
Here is a google drive link to the shared pdf:
https://drive.google.com/file/d/0B5EnqQWuojyCb0J3bDFLNzhMc2M/edit?usp=sharing
Update from Charles Hamilton's comment:
"on page 25 of the pdf, you have the BBB address as 192.168.2.7, and it should be 192.168.7.2."
Here is the end result showing the bbb_hellow_world.c debug session.
Phenomenal, Aaron!
ReplyDeleteAfter much hair loss and nearly throwing in the towel while trying some of the other guides for Eclipse/BBB remote debugging, yours wins the prize for clarity and accuracy.
One small error to fix: on page 25 of the pdf, you have the BBB address as 192.168.2.7, and it should be 192.168.7.2.
Well done, and many, many thanks.
Charles
New York, NY
I have eclipse running and gdb, has anyone successfully debugged the PRU in this environment? My host machine is 64bit Debian Wheezy.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteBob Bailey>has anyone successfully debugged the PRU in this environment?
ReplyDeleteWhat type of debugging? I think PRU debugging is very limited. Here are some PRU debug tips from TI
http://processors.wiki.ti.com/index.php/PRU_Debugging
I wrote PRU code for the OMAP L138 TI code composer studio, I used an XDS100v2 JTAG emulator for programming but I don't think it will step through PRU code. I used a logic analyzer to look at output pins so I could get the timing correct for my code, I was reading an absolute encoder.